Power Acoustik MOFO124X
Say "See Ya!" to the old MOFO, and welcome the new MOFO-X subwoofers! The new motor is refined and increases efficiency dramatically! MOFO-X subs use a non-pressed pulp cone for durability and smooth low bass. Like the original MOFOs, the new models use an aluminum dust cap that couples to the voice coil former and extends over the cone. Why? The fins brace the cone and eliminate cone flex during high excursion. Since the cap is aluminum and coupled to the coil former, it acts as a heat sink or heat extractor. Using the latest materials, the new MOFO-X subs yield superior performance!
All enclosures should be made of .75" (3/4") material only. When possible, make the baffle 1.5" (1-1/2") thick and add .75" (3/4") to the depth of the enclosure to compensate. All volumes INCLUDE vent/port and subwoofer displacements. DO NOT change the volume unless you plan on adding a substantial amount of bracing. For added performance, applying a coat of fiberglass resin to the interior walls will greatly improve sealing the enclosure. Adding a thin layer of poly-fill will improve response by smoothing out enclosure reflections.
General Features:
- 12" Dual 4 ohm Subwoofer
- Power Handling:
- Peak: 2700 watts
- RMS: 1500 watts
- Recommended power range: 1000 - 1500 watts RMS
- Impedance: Dual 4 Ohm
- Non pressed pulp cone woofer
- Polyether foam surround for enhanced excursion
- Die cast aluminum frame
- 2-1/2" 4-layer voice coil
- Anodized aluminum former
- Nickel plated 8 gauge compression wire terminal
- 170oz Strontium ferrite magnet
- Royal blue finish with diamond cut accents
- Die cast aluminum voice coil heatsink
- Dual poly cotton spiders
- Vented pole piece
- Mounting Depth: 6-15/16"